:
- +/- 0.3% Over 10:1 Turndown & +/- 0.05% Repeatability
- Flow Rates to 200 GPM (760 lpm)
- Mechanical or Electronic Registers, with Optional Preset & Printing Functions
- 1", 1½", 2" & 3" Models
- Companion Flanges Standard, 150# RF ANSI Adaptors Optional
- Anodized Aluminum or Stainless Steel
- PPS Rotors with Carbon or Teflon™ Bearings
- Viton™ or Teflon™ Seals
- 400 PSI (28 BAR) MWP with Electronic Register
- 150 PSI (10.5 BAR) MWP with Mechanical Register
- Complete Range of Accessories
- Strainer & Air Eliminator
- Mechanical Preset Valve with Linkage
- 1-Stage & 2-Stage Solenoid Valve
Options and accessores available with TS Series meters can best be understood by referring to the TUTHILL TS Series assembly options chart. When selecting a flow meter with electronic register, the register is usually specified as a separate item from the flow meter. Please consult with your distributor for complete details.
Refer to the Installation & Maintenance Manual supplied with each flow meter. For installation & calibration assistance, please contact your distributor.
1" Anodized Aluminum, Nominal 4-40 GPM (15-150 lpm)
1½" Anodized Aluminum, Nominal 6-60 GPM (23-230 lpm)
2" Anodized Aluminum, Nominal 10-150 GPM (38-570 lpm)
3" Anodized Aluminum, Nominal 20-200 GPM (76-760 lpm)
1" 303 Stainless Steel, Nominal 4-40 GPM (15-150 lpm)
1" 303 Stainless Steel, Nominal 4-40 GPM (15-150 lpm)
1" 316 Stainless Steel, Nominal 4-40 GPM (15-150 lpm)
1½" 316 Stainless Steel, Nominal 6-60 GPM (23-230 lpm)
2" 316 Stainless Steel, Nominal 10-100 GPM (38-380 lpm)
3" 316 Stainless Steel, Nominal 20-200 GPM (76-760 lpm)
